Myelinate
How learning works

Learn more from mistakes: study incorrect solutions the smart way

How to study wrong solutions so you learn more: a simple method, worked examples, and a short practice set to try now.

6 min read

In this post
  1. Find the exact failed step, not the whole page
  2. Do a one‑line numeric check before you edit
  3. Reproduce only the corrected argument
  4. Watch for steps that drop solutions
  5. Chain‑rule and derivative mistakes: spot the missing factor
  6. Turn each corrected mistake into one practice question
  7. What to practise next

You hand back a graded paper. A problem you thought you understood has a red mark and a crossed‑out step. Studying the mistake directly—find the exact failed equality and check a quick numeric test—teaches more than copying the model solution.

The method is short and repeatable: find the one equality that changed the problem, do a one‑line numeric check on that equality, then write the smallest corrected sequence you must practise. That stops you from rewriting whole solutions and focuses practice on the actual habit that caused the mark. The examples below are concrete and the checks are quick enough to do during a study session or right after class.

Find the exact failed step, not the whole page

Students often rewrite the model solution from the start because they think they missed a whole idea. Most mistakes are one algebraic slip or one omitted factor. If you can point to one algebraic equality that’s wrong, you’ve already learned the concept you need to practise.

Example. A student is asked to solve an equation and writes:

Start with the equation they were given:

2(x−3)=x+42(x-3)=x+4

The student's incorrect next line is:

2x−3=x+42x-3 = x+4

That single line is the failed step: a distribution error. Correct distribution gives

2(x−3)=2x−62(x-3)=2x-6

So the proper next line is

2x−6=x+4(correct distribution)2x-6 = x+4 \quad \text{(correct distribution)}

Finish the solution:

2x−6=x+42x−x=4+6x=10\begin{aligned} 2x-6 &= x+4 \\ 2x-x &= 4+6 \\ x &= 10 \end{aligned}

The student error was exactly one equality. Finding that equality saves time: instead of copying a whole model solution, practise distributing 22 across a bracket and the few steps that follow.

Do a one‑line numeric check before you edit

Once you’ve pointed to the suspect step, check it numerically. Pick an easy value (avoid denominators and zeros) and plug it into both sides of the suspect equality. If the numbers disagree, the step is impossible and you've found the bug. This is faster than reasoning from memory about the algebra.

Using the faulty step 2x−3=x+42x-3=x+4, check at x=0x=0:

Left (correct form) 2(0−3)=−6.Student’s left 2⋅0−3=−3.Right 0+4=4.\text{Left (correct form) }2(0-3) = -6. \\ \text{Student's left }2\cdot0-3 = -3. \\ \text{Right }0+4 = 4.

The student's equality would give −3=4-3=4 at x=0x=0, which is false. That single line shows the suspected step cannot be correct; you don’t need to reread the whole solution to see where it broke.

The numeric check also helps in subtler cases. If a step looks plausible symbolically but your check gives a mismatch, the algebra is wrong. If the numbers match for several choices, the step might be an identity or a conditional equality and you’ll need to inspect domain issues.

Reproduce only the corrected argument

After you find the faulty equality and verify it with a numeric check, write the smallest replacement that restores the logic. Practise that mini‑chain until you can do it without prompts. Short, targeted repetition beats copying entire solutions.

Return to the correct work for 2(x−3)=x+42(x-3)=x+4. The minimal replacement chain is: distribute, subtract xx, add 66. Write those steps cleanly and practise them.

2(x−3)=x+42x−6=x+42x−x=4+6x=10\begin{aligned} 2(x-3) &= x+4 \\ 2x-6 &= x+4 \\ 2x-x &= 4+6 \\ x &= 10 \end{aligned}

Write and solve three similar distribution problems in a row. If you can do that without pausing, you’ve fixed the local habit and you’re unlikely to repeat the exact error on the next test.

Watch for steps that drop solutions

Some manipulations change the domain of a problem and can hide correct answers. Students do this when they divide both sides by an expression that could be zero or cancel a common factor without noting the excluded value.

Example. A student solves

x(x−1)=0x(x-1)=0

by dividing both sides by xx and writing

x−1=0x-1=0

That step is valid only if x≠0x\neq0. Dividing by xx removes the possibility x=0x=0 outright. The correct route is factoring or the zero‑product principle:

x(x−1)=0⇒x=0orx−1=0.x(x-1)=0 \Rightarrow x=0 \quad\text{or}\quad x-1=0.

So the complete solution set is x=0x=0 or x=1x=1.

A quiet habit to form: whenever you divide by a variable expression, ask “could that be zero?” If yes, test the excluded case separately. That single question eliminates the common mistake of losing roots.

Chain‑rule and derivative mistakes: spot the missing factor

In calculus, the most frequent student error with composite functions is omitting the derivative of the inner function. Use the same three‑step approach: find the failing line, do a numerical slope check, then write the shortest corrected chain.

Example. A student writes

ddxsin⁡(x2)=cos⁡(x2)\frac{d}{dx}\sin(x^2)=\cos(x^2)

The missing piece is the derivative of the inner function x2x^2. Identify the failed step: the student applied d/dusin⁡u=cos⁡ud/du\sin u=\cos u but didn’t multiply by du/dxdu/dx.

Do a numeric derivative check at x=1x=1 by thinking about the predicted values. The chain rule gives

f′(1)=2(1)cos⁡(1)=2cos⁡(1)≈1.0806,f'(1)=2(1)\cos(1)=2\cos(1)\approx 1.0806,

while the student's incorrect answer predicts cos⁡(1)≈0.5403\cos(1)\approx0.5403. A short difference‑quotient with h=0.01h=0.01 will be close to 2cos⁡(1)2\cos(1), not cos⁡(1)\cos(1), so the missing factor is detectable numerically.

Correct application of the chain rule is this short chain:

outer =sin⁡(u),u=x2.Apply chain rule ddxsin⁡(u)=cos⁡(u)⋅u′.u′=2x⇒f′(x)=2xcos⁡(x2).\text{outer }=\sin(u),\quad u=x^2. \\ \text{Apply chain rule }\frac{d}{dx}\sin(u)=\cos(u)\cdot u'. \\ u'=2x \Rightarrow f'(x)=2x\cos(x^2).

Practice only that short sequence when you make the omission: write three derivatives of the form sin⁡(ax2)\sin(ax^2) or cos⁡(bx3)\cos(bx^3) and force the inner derivative to appear.

If you want one more reading on common chain‑rule slips, see Three chain‑rule mistakes that keep costing students marks.

Turn each corrected mistake into one practice question

The final step is to make the correction stick: create one short problem that forces the corrected move. Don’t rewrite the whole textbook problem. A single targeted question is enough practice if you do it right away and check it numerically.

Try each of these on paper before you read the solutions that follow.

  1. Distribution practice: Solve
2(x−5)=3x−4.2(x-5)=3x-4.
  1. Domain/cancellation practice: Solve
x(x−2)=0x(x-2)=0

by checking any divisions or cancellations you use.

  1. Chain‑rule practice: Differentiate
sin⁡(3x2).\sin(3x^2).

Work them on paper; then check your answers below.

Answers to the practice items

  1. Distribution practice. Start with
2(x−5)=3x−4.2(x-5)=3x-4.

Distribute:

2x−10=3x−4.2x-10=3x-4.

Collect like terms: subtract 2x2x from both sides:

−10=x−4.-10 = x-4.

Add 44 to both sides:

−6=x.-6 = x.

Solution: x=−6x=-6.

  1. Domain/cancellation practice. Equation:
x(x−2)=0.x(x-2)=0.

Zero‑product gives x=0x=0 or x−2=0x-2=0, so x=0x=0 or x=2x=2. If a student divided by xx they would remove the x=0x=0 possibility; always test the excluded x=0x=0 separately.

  1. Chain‑rule practice. Let f(x)=sin⁡(3x2)f(x)=\sin(3x^2). Outer sin⁡(u)\sin(u), inner u=3x2u=3x^2. Chain rule gives
f′(x)=cos⁡(u)⋅u′=cos⁡(3x2)⋅6x=6xcos⁡(3x2).f'(x)=\cos(u)\cdot u'=\cos(3x^2)\cdot 6x=6x\cos(3x^2).

That factor 6x6x is the inner derivative d/dx(3x2)d/dx(3x^2).

Try this before you scroll: A student solves

>x2−1x−1=x>> \frac{x^2-1}{x-1}=x >

by canceling x−1x-1 and reports x=1x=1 as the only solution. Find the mistake and give all solutions.

Answer to the boxed practice problem

Factor the numerator:

x2−1=(x−1)(x+1).x^2-1=(x-1)(x+1).

For x≠1x\neq1 we can cancel x−1x-1 to get

(x−1)(x+1)x−1=x+1(only for x≠1).\frac{(x-1)(x+1)}{x-1}=x+1 \quad (\text{only for }x\neq1).

So the original expression simplifies to x+1x+1 on its domain x≠1x\neq1. The equation becomes

x+1=x(when x≠1),x+1 = x \quad (\text{when }x\neq1),

which simplifies to 1=01=0, false. There is no x≠1x\neq1 that satisfies the equality.

At x=1x=1 the original left side is undefined (division by zero), so x=1x=1 cannot be a solution. Therefore there are no real numbers that satisfy the equation; the solution set is empty.

Common student narrative that breaks here: canceling before checking the domain changed the expression’s meaning. The student’s route effectively replaced the original equation with a different one that has a different domain, which can lead to an incorrect solution.

What to practise next

Do one focused set tonight: pick three graded errors from your last test—one algebra slip, one cancellation/divide‑by‑expression case, and one calculus omission if applicable. For each error do these three things:

  1. Point to the single failed equality or missing factor. Write it down. Bold that line.
  2. Do one numeric check (plug in a number) that shows the failure.
  3. Write the minimal corrected chain (2–4 lines) and practise that chain three times.

If you want an objective way to check whether you’re ready for more calculus problems, try the Free calculus readiness check or read about the algebra skills that matter most in first‑term calculus at The algebra skills that decide Calculus 1. If you’d like daily routines built around this mistake‑analysis method, see how the Myelinate program works at /program.

See which skills you’ve got and which you don’t

The free readiness check points you at what to work on next.

Take the check

Published November 16, 2026 by the Myelinate team.

Keep reading